Specifications & Capacities
All Flex Mowers
AFM4214 Series
Description
Discharge Type
Cutting Width
Overall Width
Specification / Capacity
Description
Specification / Capacity
Rear
14’-0”
14’-3”
Blade Drive Belt
1 B-Section
Drive Belt Tension
Spring Loaded Idler with Overcenter
Release
Transport Height
Transport Width
7’-7 1/2”
6’ - 8”
Blade Bearing
Sealed Ball Bearings
Blades
3 Each Per Deck
Low Lift (5/16" x 2 1/2" x 20 29/32")
Optional Blades:
Medium Lift, High Lift & Mulching
Overall Length
Machine Weight
14’-10” Mowing Position
12’-11” Transport Position
Blade Overlap
1 1/4"
W/15” tires = 3,000 lbs.
W/18” tires = 3,150 lbs.
Blade Spindle Speed 3,362 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP
Blade Tip Speed
Deck Tires
18,396 F.P.M.
Hitch
Pull Type with Adjustable Clevis and
Safety Tow Chain
10 each, Air tires with Sealant
18 x 9.5 or 15 x 6.6
Tongue Support
Gearbox Support
Gearboxes
2,200 lb. Capacity Screw Jack
3/8” Steel Channel
Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Transport Tires
Transport Locks
Wing Deck Flex
2 each, 23 x 10.5 with Sealant
540 RPM (1)-Splitter & (3)-Wing
Automatic with Pull Rope Release
Main Driveline (1)
Cat. lV Constant Velocity with Slip
Clutch when wings are conventional
23 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3)
Cutting Height
Cat. II with or without Slip Clutch
Center Deck Flex
10 Degrees Left To Right
22 Degrees Front To Back
3/4" to 5 1/4" (In 1/4” increments)
Hydraulic Outlets
Deck Cylinders
1 Set Required
Deck Size & Quantity 3 each / 60”
Dual Acting
Deck Overlap
6”
Gauge Wheel Arms
Turning Radius
1/4” Wall Square Tubing
Zero Turning Radius
Deck Thickness
Anti-Scalp Roller
3/16”
Front Center and
Outside Deck Corners
Mowing Capacity
@ 2 mph
@4 mph
3.39 Acres Per Hour
6.78 Acres Per Hour
10.17 Acres Per Hour
@ 6 mph
Model 4214 Specification Drawing
Designs, specifications, features and ine.
14043
7
11/14/08
315-587S continued on next 3 pages
Specifications & Capacities
All Flex Mowers
AFM4216 Series
Description
Discharge Type
Cutting Width
Overall Width
Specification / Capacity
Description
Specification / Capacity
Rear
16’- 8”
16’ -10”
Blade Drive Belt
1 B-Section
Drive Belt Tension
Spring Loaded Idler with Overcenter
Release
Transport Height
Transport Width
8’ -10”
Blade Bearing
Sealed Ball Bearings
6’- 8” With Lock Pins Installed
Blades
3 Each Per Deck
Low Lift (5/16" x 2 1/2" x 25")
Optional Blades:
Medium Lift, High Lift & Mulching
Overall Length
Machine Weight
15’-0” Mowing Position
13’-4” Transport Position
Blade Overlap
1 1/4"
W/15” tires = 3,315 lbs.
W/18” tires = 3,465 lbs.
Blade Spindle Speed 2,302 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP
Blade Tip Speed
Deck Tires
18,340 F.P.M.
Hitch
Pull Type with Adjustable Clevis and
Safety Tow Chain
10 each, Air tires with Sealant
18 x 9.5 or 15 x 6.6
Tongue Support
Gearbox Support
Gearboxes
2,200 lb. Capacity Screw Jack
3/8” Steel Channel
Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Transport Tires
Transport Locks
Wing Deck Flex
2 each, 23 x 10.5 with Sealant
540 RPM (1)-Splitter & (3)-Wing
Automatic with Pull Rope Release
Main Driveline (1)
Cat. lV Constant Velocity with Slip
Clutch when wings are conventional
23 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3)
Cutting Height
Cat. II with or without Slip Clutch
Center Deck Flex
10 Degrees Left To Right
22 Degrees Front To Back
3/4" to 5 1/4" (In 1/4” increments)
Hydraulic Outlets
Deck Cylinders
1 Set Required
Deck Size & Quantity 3 each / 72”
Dual Acting
Deck Overlap
8”
Gauge Wheel Arms
Turning Radius
1/4” Wall Square Tubing
Zero Turning Radius
Deck Thickness
Anti-Scalp Roller
3/16”
Front Center and
Outside Deck Corners
Mowing Capacity
@ 2 mph
@4 mph
4.0 Acres Per Hour
8.1 Acres Per Hour
12.1 Acres Per Hour
@ 6 mph
Model 4216 Specification Drawing
Designs, specifications, features and information are subject to change without notice.
17853
9
11/14/08
315-587S continued on next page
Specifications & Capacities
All Flex Mowers
13665
Model 4216 Specification Drawing
Designs, specifications, features and information are subject to change without notice.
10
11/14/08
315-587S End
|