Specifications & Capacities
Box Scrapers
MRL35, HRL35 & HR35 Series Retractable Box Scrapers
19” Lowback
24” Highback
MRL3572
HRL3578
78”
HR3584
84”
Working Width
72”
23 cu. ft.
931
Capacity
26 cu. ft.
972
31 cu. ft.
1117
1119
8
Weight (Pounds)
Weight (with hydraulics)
Number of Shanks
Shank Material
Not Applicable
8
981
8
3/4” x 2 1/2” heat treated spring steel
3- positions (1”, 3” & 5” below scraper end plates)
Replaceable heat treated dimpled-on tips
Shank Penetration
Shank Tip Construction
Shank Beam
Pivots to lift shanks up; transport lock on shank tube
Manual lever w/ spring assist Hydraulic cylinder Hydraulic cylinder
Roll-Formed Moldboard -17”
Lift Mechanism
Moldboard
Roll-Formed Moldboard - 23”
1/2” thick x 24” high x 30” deep
27 1/2”
Side Panels
1/2” thick x 19” high x 30” deep
28”
Depth of Bucket
Cutting Blades
2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating
3-Point Hitch Construction
3-Point Hitch Type
65 HP
Harden bushings in upper and lower hitch points
Category l & II
26995
MRL3572 Not Shown
Designs, specifications, features and information are subject to change without notice.
21
2/21/09
305-054S
|